• 1：time/day: set current time as your clock 2:regeneration time: 2am 3:salt amount 4:capacity 5:hardness: 25 ~ 30 in kitchener (水城百事)

by skyxu, Friday, June 15, 2012, 12:52 @ Sunny

1：time/day: set current time as your clock
2:regeneration time: 2am
3:salt amount
4:capacity
5:hardness: 25 ~ 30 in kitchener
然后屏幕下方四个按键，；其中一是“循环”的标志是做什么的也不知道，:regenerate tonight if you press one time, regenerate immediately if you press and hold more than 5 seconds.
The capacity shows how much capacity left before next regeneration.
The salt amount shouldn't change.
Normally if people on vacation and the softener lost power for a long time, the time will change when power back on.
If water stopped coming out of the drain line by itself, that means softener was regenerating when you were present. You just need to set time/day and regeneration time. But the best way to make sure softener is working or not is by testing water.