软化水设备不同,是不是会导致用水量的差异。有谁能提供专业的信息吗?比如一般情况下每次软化过程大概用水多少? (水城百事)
[ No text ]
我家反洗一次0.2立方差不多一个月一带盐
[ No text ]
200L正常,一个月一袋子盐有点多?我一年也就四五袋子
[ No text ]
每天反洗还是每周反洗?用盐量和用水量还是有关系的吧
[ No text ]
100有点多,我家60多
[ No text ]
每天晚上睡觉时间平均用水都要0.2-0.3,如果有regeneration要0.8一夜,大概每三天一次
[ No text ]
看人口吧 我們家2大1小 天天洗澡 一袋有時不到一個月 之前單身 偶爾才買鹽 現在Sale要囤積
[ No text ]
有人能分享一下家里软化水每次regeneration的用水量吗?
[ No text ]
The most water is used during backwash which is about 6 to 10 minutes. It depends on your setting. In general it's around 200 to 500 litre per regeneration.
Baskwash is to remove all dirts trapped in the resin and prepare for brine/rinse process. Keep in mind, it doesn't mean it 's good if less water is used. It may result not enough cleaning during backwash.
Old softener regenerates by timer-3 to 7 days, depends on setting. Current softener normally regenerates by meter-3 to 10 days depends on water usage and softener capacity.
Example: 40000 grain capacity softener. If hardness is 25 grain/gallon, the capacity of softener is 1600 gallon. If you use 200 gallon water per day, the softener regenerates every 7 to 8 days.







